|Cabinet Material||Mild Steel, Stainless Steel|
|Sterilization||UV Germicidal Tube|
|Noise Level||Less than 65 db|
|Voltage (V)||220 V|
|Frequency (Hz)||50 Hz|
|Motor Power||1/4 HP|
The cabinets are fabricated out of thick board duly sun mica clad. Interior surfaces are epoxy painted for its longer life. The worktable is made of heavy gauge S.S. sheet and is fitted with U.V Germicidal Light, static pressure manometer, exhaust System (suitable for 6 feet duct) and virus burn out unit. Side panels are made out of thick transparent Plexiglas duly framed. The unit is fitted with pre filter and HEPA Filter. Air is drawn through pre filter and is made to pass through highly effective HEPA (High Efficiency Particulate Air) filters having efficiency retaining all air- borne particles of size 0.3 micron and larger. Using a dynamic balancing machine, the blower and motor assembly is statically and dynamically balanced. Motor of 1/ 4 H.P. capacity operates with minimum noise level. The working area is illuminated by fluorescent lighting fitted to the unit. The height of the working table provides a comfortable "SIT DOWN" working position for the operator.
|Minimum Order Quantity||5 Unit|
Construction & Other Details :- The Body Sanitizer chamber, disinfection chambers are able to sterilize the human body from germs, bacteria and viruses. The disinfection chamber is very easy to use, simply enter it, turn on the switch and rotate your body 360 degrees as disinfectant is sprayed inside the chamber. The antiseptic spray used in the chambers resembles hand sanitizer fluid in its composition. It's different from the disinfectant liquid used to spray public facilities and will not irritate your skin or eyes. The manual chamber, which requires a human operator, is suitable for indoor usage. Meanwhile, the automatic one is suitable for outdoor usage in public places, such as Hospital, Industrial Area Government Office, School, Collage, University, MNC Company and markets, because the chamber would automatically spray disinfectant whenever a person enters it. The chamber holds two hundred litres of liquid disinfectant that can be used for approx. 50 people at most. It takes three seconds to spray disinfectant on one person. The 6.5 feet high and 5 feet wide disinfectant chamber is fitted with pipes. You enter the chamber through a small tunnel and then the pipes will spray a mixture of water and Hypo-Sodium Chloride from all directions.
Technical Specification:-•Sanitizer chamber Body Material made by stainless steel Sheet -304. •Sanitizer Chamber Size – 1250mm X 1250mm X 2100mm ( L X B X H ) •Number of Nozzle inside the chamber – 04 No’s. •Spray Pressure Used By Hydro pump / Air Compressor •Sanitizer Chamber Liquid Storage Tank Capacity – 200 Litres. •In this chamber we can set the time as per the need. •When the person enters inside the chamber, the nozzle spray will start automatic.•When the person exit’s the chamber, the nozzle spray will stop automatically according to the settable time. •Automatic sensors enabled ON/OFF.•Sensors are based on laser technologies. •Hand Sanitizing space at the end of the chamber.
|Surface Finish||Powder Coated|
|Color||White & blue|
|Voltage (V)||220 V AC|
|Frequency (Hz)||50 Hz|
Our VERTICAL Laminar air flows are designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet Class 100 (Class conditions). The cabinets are fabricated out of thick board duly sun mica clad/ stainless steel/ Mild steel sheet. Interior surfaces are epoxy painted for its longer life. The worktable is made of stainless steel sheet and side panels are made out of thick transparent Plexiglas duly framed. The unit is fitted with pre-filter and is made to pass through highly effective HEPA (High Efficiency Particulate Air) filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all airborne particles of size 0.3 micron and larger. Using a dynamic machine, the blower and motor assembly is statically and dynamically balanced ISI marked motor of 1/5 H.P. capacity operates with minimum noise level. The working area is illuminated by fluorescent lights fitted to the unit. Height of the working table provides comfortable "SIT DOWN" working position for the operator. Supplied complete with manometer, UV light fluorescent light.